Forming Steel


We are a steel forming powerhouse with some of the most powerful and largest press breaks in North America, capable of forming and rolling the hardest and toughest steels on the earth, including bending up to 4.5”-thick steel plates.

We use superior material from Hardox and Strenx steels produced by SSAB. These steels have guaranteed specifications with tighter tolerances, cleaner finishes, and superior workability and weldability as compared to similar plate types or their ASTM equivalent call-out.

Utilizing CNC guided tooling in all our shops gives our operators and machinists higher accuracy and unmatched repeatability. Our multiple high-tonnage cranes, custom oversized forklifts, and press backgauge plate handlers allow us to move these massive parts during fabrication. In addition to accepting customer drawings, our experienced drafting and engineering team can match any template provided or reverse engineer from your sample. We also have over 60,000 drawings on file from past orders and stock parts.


AccurPress 2100 Rocker Press

Model #: HT 7210013
2100 Ton Capacity (700 ton per foot)
CNC, +/-0.030 accuracy
124” max width

Our newest press is built for strength, delivering an impressive 2,100 tons of total force used to form steel up to 6 inches thick into roll plates (dependent on the part width, applied at 700 tons per foot).

AccurPress 2000 Press Break

Model: Accell 5200024
2000 Ton Capacity (200 Ton Per Foot)
CNC, +/-0.030 accuracy
242” max width

This press goes the distance! The 2000 is our largest and longest press and can form up to 244” of steel, allowing us to shape long plates in a single formed sheet — other shops would have to do this in multiple sections.

AccurPress 600 Rocker Press Brake

Model: HT 760014
600 Ton Capacity (100 ton per foot)
CNC, +/-0.030 accuracy
132” max width

The 600 Rocker was our first press brake and has become the daily workhorse of our forming line. We leverage this brake to form all of our smaller plates and thinner material rolls.

Haeusler Roll Press

Model # VRM-HY-3050-228
CNC4 Roller
2 and 1/2” max thickness
122” max width

Our Haeusler Roll Press is a 4-drum roller that can make full circles and cones from plate by running the material between the roller drums. This machine has a 122” workable width and can roll up to 2-1/2” thick steel.